CHEMICAL TUBE RAMSET M16

CHEMICAL DESCRIPTION CUPTUBE Ramset M16
Ramset M16 capsule chemical is a quick-setting chemical to attach M16x190 threaded rods to concrete to form M16x190 chemical bolts.

APPLICATIONS OF RAMSET M16 TUBE CHEMICAL
Structural steel anchors (e.g. racks, guard rails, fences and gates)
Anchoring in industries (e.g. machinery, elevators, cranes and industrial equipment)
Anchoring applications requiring dynamic loads or earthquake resistance
Securing items along the road and in the tunnel (e.g. impact and noise barriers, overhead catenary systems)
Anchoring at the edge of the slab or on narrow supports (e.g. beams, balconies)
ADVANTAGES OF RAMSET M16 TUBE CHEMICAL
Faster setting time than epoxy-based bottle chemicals using a pump gun (About 30 minutes compared to 8 hours)
Stable construction is easier than with epoxy-based bottled chemicals using a pump gun because a capsule is fixed to a threaded rod and there is no need to worry about pumping enough chemicals.
However, we must also mention the disadvantages that are more expensive and not as flexible as using pump-gun chemicals.
CHEMICAL CONSTRUCTION OPERATION FOR RAMSET M16 TUBE
Step 1: Drill an 18mm hole, 125mm deep in the concrete
Step 2: Use a brush and dust blower to clean the bore
Step 3: place Ramset M16 capsule chemical into the drill hole
Step 4: Install the threaded rod into the drilling machine through a tool called the setting tool and then drill the threaded rod to break the sleeve
Step 5: Wait for the capsule chemical to set and then install the load. Normally, the setting time to reach maximum strength is 30-40 minutes
CHEMICAL FORCE SPECIFICATIONS RAMSET M16 TUBE TUBE USED WITH M16x190 THREADED ROD GRADE 5.8
Traction force: 30KN corresponding to a weight of 3 tons
Cutting force: 30KN corresponding to a weight of 3 tons
The above parameters are recommended when used with C20/25 basic concrete

CHEMICAL FORCE SPECIFICATIONS RAMSET M16 TUBE TUBE USED WITH M16x190 THREADED ROD GRADE 8.8
Traction force: 36KN corresponding to a weight of 3.6 tons
Cutting force: 36KN corresponding to a weight of 3.6 tons
The above parameters are recommended when used with C20/25 basic concrete