Mitutoyo digital caliper 500-173-30 (0-300mm/0-12'')

Specifications
Produced by Mitutoyo
Model 500-173-30
Made in Japan
Measuring range 0-300mm / 0-12''
Accuracy ±0.03mm / ±0.0015''
Display 0.01mm / 0.0005''
Mitutoyo digital caliper
Mitutoyo electronic caliper (ABSOLUTE Digimatic Caliper) is manufactured according to modern Japanese production technology used to measure the inside size, outside size, measure the turning distance, measure the depth of the details. or samples with high accuracy, fast measurement speed.

Mitutoyo digital caliper 500-197-30

Mitutoyo 500-197-30 electronic caliper taken at Mitutoyo.VN

Mitutoyo 500-173-30 (0-300mm/0-12'') electronic caliper with high accuracy, measuring range 0-300mm/0-12in in mm and inch system, Display: 0.01mm/ 0.0005in easy to use, Accuracy: ±0.03mm suitable for measuring, checking details, material thickness in technical industries such as construction, mechanical engineering, mold, automobile, interior, …

Advantages of Mitutoyo electronic calipers
The Mitutoyo 500-173-30 electronic caliper is made of measuring tool steel with a low coefficient of thermal expansion, the sliding surface is polished with a high gloss finish with an innovative design slider that makes the device moveable. light and gives accurate measurement results, high measurement stability.

Mitutoyo digital caliper 500-197-30

Mitutoyo 500-197-30 electronic caliper taken at Mitutoyo.VN

Mitutoyo electronic caliper uses an electromagnetic induction reader with a linear encoder on the body combined with mitutoyo's ABSOLUTE technology to accurately determine the measuring position of the ruler as soon as the power is turned on without needing to adjust or set. reset the ruler.

mitutoyo electronic caliper uses 1 SR44 battery with 0% Hg component to help protect the environment and increase usage time, low voltage warning function, measurement error error, contained in a plastic box to help protect The size is better, convenient in storage and transportation.

There is a factory certificate attached to check the accuracy of the ruler from the Mitutoyo-Japan factory, the Serial number on the certificate is the same as the Serial number on the back of the ruler, which is encrypted by QR code to avoid customers Buy fake goods, imitation goods on the market, with 4 function buttons including: Origin - Factory setting, Zero/ABS - set position 0, inch/mm - convert mm to inch, On/Off - On , turn off the power conveniently during use.

Highly durable impact-resistant LCD display, 9.0 mm character height improves readability, Measurement results are displayed on a clear electronic display for easy quick reading. fast. Refer to the article: Instructions on how to use an electronic caliper for the most accurate results.

Notes when using calipers
- The caliper should be stored in a dry place, away from moisture and high humidity, regularly checked for accurate calibration.

- Do not put the caliper together with other repair and processing tools to avoid damage due to collision. Do not place the ruler on top of other tools or place other tools on top of the ruler to prevent the ruler from warping.

Mitutoyo 530-197-30 digital caliper (0-200mm/0-8'')

Product electronic caliper 500-173-30

- Do not use the ruler to measure when the object is rotating or moving, when using the caliper, avoid dropping the ruler on the floor, workshop floor, machine tape, hard surfaces ...

- Always keep the ruler free from dirt and dust on the surface of the caliper before and after use, clean the ruler with a clean rag and apply specialized oil or use RP7 solution to clean the surface of the ruler.

- Do not use the ruler in an environment with water or oil directly acting on the ruler, in case the ruler gets water or oil in it, you must remove the battery cover, take out the battery immediately and use a dryer or use air to blow on the side. in the battery cover until dry.

- After inserting the battery, put the two calipers close together, use your eyes to observe without gaps, press and hold the Origin button for 6 seconds until the screen shows the number 0.00mm to use.

- When not in use, press the On/Off button to turn off the power, put the ruler in the correct position in the plastic box for storage. When the screen dims with the letter B flashing, the battery is almost dead and you must replace the battery for the ruler.